Mutual Screw & Supply

0.139" CS X 6.984" ID 布納N腈橡膠O型環 | AS568-264 | Dash 264 | 硬度70 | 黑色 (60 / 包裝)

0.139" CS X 6.984" ID 布納N腈橡膠O型環 | AS568-264 | Dash 264 | 硬度70 | 黑色 (60 / 包裝) - Main image
$35.12 $50.9 In stock

Buna-N 丁腈橡膠 O 型環,尺寸為 AS568-264,內徑 6.984",截面 0.139"。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。也稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 尺寸代號: 264
  • 截面: 0.139"(3.53 mm)
  • 內徑: 6.984"(177.39 mm)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 60 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Madison ★★★★★

The 6.984" inner diameter was spot-on for my flange, and the 70 durometer gives just the right firmness without being impossible to seat. Ordered the 60-pack so I’ve got spares for every future teardown, and at -40°F rating they’ll handle my outdoor compressor all winter.

Claire E. ★★★★★

I needed a large-diameter seal for a hydraulic cylinder rebuild, and the 70-durometer hardness of these #264 o-rings gripped perfectly without being too stiff to install. The rubber feels dense but flexible, and they seated evenly in the groove.

William Q. ★★★★★

For a 6.984" inner diameter, these #264 rings seat perfectly in my deep-groove flanges and the 70 durometer is firm enough to hold pressure without getting brittle in the heat. I've used them up to 220°F on a hydraulic line for three weeks now and there's zero weeping at the seal. The pack of 60 mea