Mutual Screw & Supply

Buna-N 丁腈橡膠 O 型環 | 0.139" CS × 9.984" ID | AS568-276 | Dash 276 | 硬度 70 | 黑色 (35 個/包)

Buna-N 丁腈橡膠 O 型環 | 0.139" CS × 9.984" ID | AS568-276 | Dash 276 | 硬度 70 | 黑色 - Main image
$36.35 $53.46 In stock

Buna-N 腈橡膠 O 形環,尺寸 AS568-276、9.984" 內徑 x 0.139" 截面。服務溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 形環
  • 材質: Buna-N 腈橡膠
  • AS568 短線尺寸: 276
  • 截面: 0.139"(3.53 毫米)
  • 內徑: 9.984"(253.59 毫米)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 35 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Sebastian ★★★★★

The 0.139" cross-section is exactly what I needed for a stubborn hydraulic seal, and the 70 durometer feels firm but still compresses into place without a fight. I've used them down in the low 20s outside and they haven't cracked. Solid buy for the money.

Penelope Y. ★★★★★

These seals fit perfectly on a large air compressor head I rebuilt last week. The 70 durometer rubber seated nicely without any distortion, and they handled the heat just fine during the first full test run.

John ★★★★★

I work on hydraulic cylinders that see a lot of heat and pressure, and these o-rings are holding up great even at 250°F. The 70 durometer gives just the right balance of sealing force and flexibility for the job.