Mutual Screw & Supply

0.21" CS × 1.475" ID 布納N腈橡膠O型環 | AS568-325 | Dash 325 | X型環 | 70硬度 (100個/包)

0.21" CS × 1.475" ID 布納N腈橡膠O型環 | AS568-325 | Dash 325 | X型環 | 70硬度 (100個/包) - Main image
$44.12 $64.88 In stock

Buna-N 腈橡膠 O 型環,尺寸 AS568-325,內徑 1.475 英吋,截面 0.21 英吋。服務溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O型環(X型環)
  • 材質: Buna-N(丁腈橡膠)
  • AS568 尺寸: 325
  • 截面: 0.21 英吋(5.33 公釐)
  • 內徑: 1.475 英吋(37.47 公釐)
  • 硬度: 70 Shore A
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 100 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Riley E. ★★★★★

Needed a replacement for a worn-out seal on a hydraulic cylinder, and these x-rings fit the groove perfectly. The 70 durometer feels firm but still pliable enough to seat without a struggle.

James ★★★★★

The 0.21" cross-section is noticeably beefier than the standard size I was using, and the 70 durometer seals perfectly on my hydraulic fitting without any leaks. I've put them through a few heat cycles up to 200°F and they've held up great so far.

Violet R. ★★★★★

These o-rings fit perfectly on my air compressor intake valve. The 1.475" ID was exactly what I needed, and the Buna-N material handles moderate heat without any issues.