Mutual Screw & Supply

0.21" CS × 3.1" ID 丁腈橡膠O型環 | AS568-338 | Dash 338 | 硬度70 | 黑色 (150 / 包)

0.21" CS × 3.1" ID 丁腈橡膠O型環 | AS568-338 | Dash 338 | 硬度70 | 黑色 (150 / 包) - Main image
$44.12 $63.03 In stock

Buna-N 丁腈橡膠 O 型環,規格 AS568-338,內徑 3.1 英吋 × 截面 0.21 英吋。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 短劃尺寸: 338
  • 截面: 0.21 英吋(5.33 公釐)
  • 內徑: 3.1 英吋(78.74 公釐)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 150 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.6 / 5 · 5 reviews)

Edward ★★★★★

I needed a batch of reliable seals for a pneumatic actuator rebuild, and these dash 338 rings matched the spec sheet perfectly. The 70-durometer hardness gives them a firm, consistent feel while still compressing nicely into the groove.

Victoria Z. ★★★★★

These o-rings fit perfectly on my air compressor check valve, and the 70 durometer feels just right for a good seal without being too stiff. I’ve been running them up to 200°F with no issues at all.

Kevin ★★★★★

Rebuilt my hydraulic press with a full pack of these and the sizing was dead-on with no fuss. The 70 durometer hardness gives them just enough squish to seal without being mushy, and they slid right over the gland without tearing.