Mutual Screw & Supply

0.21" CS X 3.475" ID 丁腈橡膠O型環 | AS568-341 | Dash 341 | 硬度70 | 黑色 (100個/包)

0.21" CS X 3.475" ID 丁腈橡膠O型環 | AS568-341 | Dash 341 | 硬度70 | 黑色 (100個/包) - Main image
$39.46 $53.33 In stock

Buna-N 丁腈橡膠 O 型環,規格為 AS568-341,3.475" 內徑,0.21" 截面。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 規格尺寸: 341
  • 截面: 0.21"(5.33 mm)
  • 內徑: 3.475"(88.27 mm)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 100 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

William ★★★★★

These seals handled the heat in my hydraulic press without any deformation, and the -40°F to +250°F range gives me real confidence for outdoor gear. The 70 durometer feels firm but not brittle when I seat them into the groove.

Benjamin E. ★★★★★

The 0.21 inch cross section fits perfectly into the groove on my old air compressor, finally stopping a small leak I'd been chasing for weeks. The rubber feels dense and pliable, and they handled 200°F without any issues during testing.

Avery ★★★★★

Finally got a proper seal on my hydraulic pump after swapping out the old worn ones; these 70-durometer rings handle the 250°F operating temperature just fine. The 3.475" inner diameter fits snugly, and the bag of 100 should last me through several rebuilds.