Mutual Screw & Supply

0.21" CS X 3.725" ID 丁腈橡膠O型環 | AS568-343 | Dash 343 | 硬度70 | 黑色(100/包)

0.21" CS X 3.725" ID 丁腈橡膠O型環 | AS568-343 | Dash 343 | 硬度70 | 黑色(100/包) - Main image
$34.6 $55.81 In stock

Buna-N 丁腈橡膠 O 型環,尺寸為 AS568-343,內徑 3.725 英吋,截面 0.21 英吋。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。也稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 短劃尺寸: 343
  • 截面: 0.21 英吋(5.33 毫米)
  • 內徑: 3.725 英吋(94.61 毫米)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 100 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Steven G. ★★★★★

The inner diameter is spot on for my hydraulic cylinder rebuild, and the cross-section seats perfectly in the groove. These seals handled hot fluid right out of the package without any swelling.

Zoe ★★★★★

The 70 durometer feels just right for the air fitting I needed to seal — not too stiff, not too soft. These 3.725" ID rings fit perfectly and the whole pack of 100 will last me years of spares. Nice to have the exact AS568 size on hand for a change.

Victoria H. ★★★★★

Exactly the right size for replacing the seal on my air compressor's piston, and the 70 durometer gives just enough stiffness without being brittle. The 0.21" cross-section fits perfectly into the groove.