Mutual Screw & Supply

Buna-N 尼特里爾 O 型環 | 0.21" CS × 6.225" ID | AS568-356 | Dash 356 | 70 硬度 | 黑色 (50 個/包)

Buna-N 尼特里爾 O 型環 | 0.21" CS × 6.225" ID | AS568-356 | Dash 356 | 70 硬度 | 黑色 (50 - Main image
$34.3 $57.17 In stock

Buna-N 腈橡膠 O 型環,尺寸 AS568-356,內徑 6.225 英吋,截面 0.21 英吋。服務溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 腈橡膠
  • AS568 破折尺寸: 356
  • 截面: 0.21 英吋(5.33 公釐)
  • 內徑: 6.225 英吋(158.11 公釐)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 50 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Eva ★★★★★

The 70 durometer feels spot-on for sealing a low-pressure air fitting I was repairing. Pack of 50 is plenty for spares, and the cross-section measured exactly 0.21" as listed.

Owen G. ★★★★★

I needed a few of these for a hydraulic cylinder rebuild, and the 0.21" cross-section fit perfectly into the groove. They seated snugly with no distortion, and the rubber feels durable without being too stiff.

Lily ★★★★★

The -40°F rating is exactly why I grabbed these for our outdoor compressor lines, and the 70 durometer feels firm but not brittle when I stretch them over the fittings. Installed a full set yesterday, no leaks on the first test run.