Mutual Screw & Supply

0.21" CS x 6.475" ID 丁腈橡膠 O型環 | AS568-357 | Dash 357 | 硬度 70 | 黑色 (50 個/包)

0.21" CS x 6.475" ID 丁腈橡膠 O型環 | AS568-357 | Dash 357 | 硬度 70 | 黑色 (50 個/包) - Main image
$35.47 $58.15 In stock

Buna-N 丁腈橡膠 O 型環,規格為 AS568-357,內徑 6.475 英吋,線徑 0.21 英吋。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 規格尺寸: 357
  • 線徑: 0.21 英吋(5.33 公釐)
  • 內徑: 6.475 英吋(164.46 公釐)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 50 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Adam E. ★★★★★

The 70 durometer hardness on these o-rings is exactly what I needed for a snug seal on my hydraulic fitting, and they handled the hot oil during testing without any issue. The 0.21-inch cross-section feels substantial and durable, definitely a solid upgrade from the worn-out ones I replaced.

Ryan A. ★★★★★

The 6.475-inch inner diameter fit perfectly on my hydraulic cylinder flange, and the 70 durometer feels firm yet pliable enough for a secure seal. I've used cheaper o-rings before, but these Buna-N ones seem much more durable and resistant to petroleum oils.

Natalie ★★★★★

The cross-section on these is exactly 0.21", so it seated perfectly in the groove I needed to seal on our hydraulic cylinder. After a week of use under constant pressure, no leaks or hardening at all.