Mutual Screw & Supply

0.21" CS X 8.475" ID Buna-N 腈橡膠 O型環 | AS568-365 | Dash 365 | 70硬度 | 黑色 (40個/包)

0.21" CS X 8.475" ID Buna-N 腈橡膠 O型環 | AS568-365 | Dash 365 | 70硬度 | 黑色 (40個/包) - Main image
$39.82 $55.31 In stock

Buna-N 丁腈橡膠 O 型環,AS568-365、8.475" 內徑 x 0.21" 截面。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 規格尺寸: 365
  • 截面: 0.21"(5.33 mm)
  • 內徑: 8.475"(215.26 mm)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 40 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Joshua ★★★★★

Replaced the old dried-out o-rings on my pressure washer with these and the 0.21" cross-section fit perfectly snug in the groove. No leaks so far, and I like that they handle up to 250°F since the water gets pretty hot.

Charlotte Y. ★★★★★

Popped these on my old hydraulic cylinder and they seated perfectly with no leaks. The 70 durometer feels just right—firm enough to hold pressure but not too stiff. Quick test at 180°F showed no swelling or distortion.

Aurora W. ★★★★★

Replacing the old cracked seals on my compressor was a breeze once these arrived, and the 8.475" inner diameter fit the groove perfectly with no wrestling. Noticed they're noticeably more flexible than the cheap ones I pulled off, which makes me trust the 70 durometer rating for the long haul. Defin