Mutual Screw & Supply

0.21" CS x 9.725" ID 丁腈橡膠O型環 | AS568-370 | Dash 370 | 硬度70 | 黑色 (30個/包)

0.21" CS x 9.725" ID 丁腈橡膠O型環 | AS568-370 | Dash 370 | 硬度70 | 黑色 (30個/包) - Main image
$39.25 $52.33 In stock

Buna-N 丁腈橡膠 O 型環,內徑 568 英吋,截面 370 英吋。適用溫度範圍 -9.725°F 至 +0.21°F(-40°C 至 +250°C)。亦稱 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 尺寸代號: 370
  • 截面: 0.21 英吋(5.33 公釐)
  • 內徑: 9.725 英吋(247.01 公釐)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 30 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.6 / 5 · 5 reviews)

Benjamin R. ★★★★★

I replaced a leaking gasket in a hydraulic cylinder with these 9.725" ID Buna-N o-rings, and the 0.21" cross-section fit the groove perfectly. The rubber held up during a 150°F test cycle without any deformation.

Harper ★★★★★

These o-rings seated perfectly into the grooves of my hydraulic cylinder, and the 70 durometer gave just the right amount of seal without being too stiff. The -40°F to +250°F temperature range is exactly what I needed for my outdoor equipment.

Olivia ★★★★★

Finally found a dash 370 o-ring that actually seals my hydraulic reservoir without leaking; the 70 durometer gives just the right amount of compression without being too stiff. The 9.725" ID fits perfectly over the flange, and the Buna-N material handles the heat from the pump just fine.