Mutual Screw & Supply

0.21" CS X 18.975" ID 丁腈橡膠O型環 | AS568-391 | Dash 391 | 70硬度 | 黑色 (8 / 包)

0.21" CS X 18.975" ID 丁腈橡膠O型環 | AS568-391 | Dash 391 | 70硬度 | 黑色 (8 / 包) - Main image
$33.52 $54.07 In stock

Buna-N 丁腈橡膠 O 型環,尺寸為 AS568-391,18.975" 內徑 x 0.21" 截面。使用溫度範圍 -40°F 至 +250°F(-40°C 至 +121°C)。亦稱為 NBR、Buna-N、Chemigum、Hycar、Perbunan。

規格參數

  • 產品類型: O 型環
  • 材質: Buna-N 丁腈橡膠
  • AS568 規格尺寸: 391
  • 截面: 0.21"(5.33 mm)
  • 內徑: 18.975"(481.97 mm)
  • 硬度: 70 Shore A
  • 顏色: 黑色
  • 溫度範圍: -40°F 至 +250°F(-40°C 至 +121°C)
  • 測量類型: 英制
  • 包裝數量: 每包 8 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.6 / 5 · 5 reviews)

Grace B. ★★★★★

Installed these on a pump manifold where I needed a reliable seal at higher temps, and they held perfectly through several heat cycles. The 0.21" cross-section feels substantial compared to thinner o-rings I've used.

Mia Y. ★★★★★

I needed a 19-inch o-ring for a large hydraulic cylinder, and the 0.21" cross-section fits perfectly into the groove. The rubber feels pliable yet firm, and it sealed on the first try with no leaks.

John ★★★★★

These Buna-N o-rings have a nice, consistent feel, the 70 durometer seems just right for my hydraulic cylinder rebuild. The 18.975-inch inner diameter was spot-on, and they seated perfectly without any distortion.