Mutual Screw & Supply

0.103" CS × 0.549" ID HNBR O型環 | AS568-113 | Dash 113 | 硬度70 (100/包)

0.103" CS × 0.549" ID HNBR O型環 | AS568-113 | Dash 113 | 硬度70 (100/包) - Main image
$35.67 $54.88 In stock

HNBR O 型環,內徑 113 × 0.549 英吋,截面 0.103 英吋。服務溫度範圍 -40°F 至 +300°F(-40°C 至 +149°C)。也稱為 HSN,高度飽和之腈橡膠。

規格參數

  • 產品類型: O型環
  • 材質: HNBR
  • Dash 尺寸: 113
  • 截面: 0.103" (2.62 mm)
  • 內徑: 0.549" (13.94 mm)
  • 硬度: 70 Shore A
  • 溫度範圍: -40°F 至 +300°F (-40°C 至 +149°C)
  • 測量類型: 英制
  • 包裝數量: 每包 100 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Adam T. ★★★★★

The HNBR material feels noticeably firmer than standard nitrile, which gives me confidence for higher-temp applications. These 113 o-rings seated perfectly into a hydraulic port on my shop press, and the 70 durometer seems just right for a tight seal without being too stiff.

Steven T. ★★★★★

I needed o-rings that could handle higher heat than standard Buna-N, and these HNBR ones fit the bill perfectly with that 300°F rating. The durometer feels just right for the hydraulic fitting I repaired—not too stiff, not too soft.

Natalie ★★★★★

The 0.103" cross-section on these HNBR o-rings feels a bit meatier than the standard ones I've used, and they slid into groove without any fighting. Used them to rebuild an old hydraulic cylinder and they sealed up perfectly even after a few heat cycles.