Mutual Screw & Supply

0.139" CS x 3.734" ID PTFE O型環 | AS568-240 | 代號240 | 24硬度 (10個/包)

0.139" CS x 3.734" ID PTFE O型環 | AS568-240 | 代號240 | 24硬度 (10個/包) - Main image
$37.11 $53.01 In stock

PTFE O型環,內徑 AS568-240、3.734",截面 0.139"。使用溫度範圍 -350°F 至 +500°F(-212°C 至 +260°C)。也稱為鐵氟龍、聚四氟乙烯。

規格參數

  • 產品類型: O型環
  • 材質: PTFE
  • AS568 尺寸代號: 240
  • 截面: 0.139"(3.53 mm)
  • 內徑: 3.734"(94.84 mm)
  • 硬度: 24 蕭氏A
  • 溫度範圍: -350°F 至 +500°F(-212°C 至 +260°C)
  • 測量類型: 英制
  • 包裝數量: 每包 10 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.2 / 5 · 5 reviews)

Michael B. ★★★★★

I was worried about getting a good seal under high heat, but these PTFE rings held up perfectly at 450°F in my furnace. The 0.139" cross-section feels substantial and didn't deform at all.

Carter S. ★★★★★

The -350°F lower limit is perfect for our liquid nitrogen handling setup, and they fit the groove precisely without any binding. Out of 10, all sealed on the first try with no leaks visible under UV dye.

Owen ★★★★★

Installed these in a high-temp pneumatic application where standard rubber seals were failing weekly. The PTFE handles the 400°F cycles perfectly, and the 24 durometer gives just enough compliance to seal without being too stiff.