Mutual Screw & Supply

0.21" CS X 12.975" ID 矽膠 O 型環 | AS568-379 | Dash 379 | 符合 FDA 規範 | 70 硬度 | 紅色 (8 個/包)

0.21" CS X 12.975" ID 矽膠 O 型環 | AS568-379 | Dash 379 | 符合 FDA 規範 | 70 硬度 | 紅色 - Main image
$32.54 $53.35 In stock

AS568-379、12.975" 內徑 x 0.21" 斷面之矽膠 O 型環。使用溫度範圍 -80°F 至 +450°F(-62°C 至 +232°C)。亦稱為 VMQ、Silastic。

規格參數

  • 產品類型: O 型環
  • 材質: 矽膠
  • AS568 徑號: 379
  • 斷面: 0.21"(5.33 mm)
  • 內徑: 12.975"(329.56 mm)
  • 硬度: 70 Shore A
  • 顏色: 紅色
  • 溫度範圍: -80°F 至 +450°F(-62°C 至 +232°C)
  • 測量類型: 英制
  • 法規符合性: FDA 21 CFR 177.2600
  • 包裝數量: 每包 8 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Joseph ★★★★★

I needed something that could handle high heat for a commercial sealing project, and these red silicone rings fit the bill perfectly. The 70 durometer feels just right — firm enough to hold a seal but not too stiff to install.

William ★★★★★

Finally, a 12.975" ID ring that actually seals without me having to wrestle it on with tools. The 70 durometer gives just the right squish, and these red ones are easy to spot when I'm swapping parts. Replacing the old batch with these was a twenty-minute job, and so far, zero leaks at our standard

Penelope ★★★★★

These handled the 230°F heat cycling on my custom gasket setup without any visible wear or hardening. The 70 durometer strikes a nice balance—firm enough to hold a seal, soft enough to deform and seat properly.