Mutual Screw & Supply

0.139" CS x 2.609" ID 氟橡膠FKM O型環 | AS568-231 | Dash 231 | X型環 | 硬度70 (15顆/包)

0.139" CS x 2.609" ID 氟橡膠FKM O型環 | AS568-231 | Dash 231 | X型環 | 硬度70 (15顆/包) - Main image
$33.59 $50.9 In stock

Viton FKM O型環,AS568-231,內徑2.609",線徑0.139"。使用溫度範圍 -15°F 至 +400°F(-26°C 至 +204°C)。也稱為 FKM、氟橡膠。

規格參數

  • 產品類型: O型環(X型環)
  • 材質: Viton FKM
  • AS568 尺寸代號: 231
  • 截面: 0.139"(3.53 公釐)
  • 內徑: 2.609"(66.27 公釐)
  • 硬度: 70 Shore A
  • 溫度範圍: -15°F 至 +400°F(-26°C 至 +204°C)
  • 測量類型: 英制
  • 包裝數量: 每包 15 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Jacob T. ★★★★★

I needed o-rings that could handle higher heat for a seal repair on an industrial dryer, and these Viton FKM ones fit the bill perfectly. The 0.139" cross-section seated snugly in the groove, and they've held up fine through several hot cycles so far.

Elizabeth C. ★★★★★

The temperature rating is exactly what I needed for a high-heat seal application, and the 70 durometer feels just right—not too stiff, not too soft. These Viton FKM rings slid into place perfectly and show no signs of swelling after a week of use.

Benjamin D. ★★★★★

Finally got these to replace some worn-out standard o-rings on a hot oil system, and the FKM material is handling the 350°F operating temps perfectly so far. The 70 durometer feels just right for sealing without being too stiff.