Mutual Screw & Supply

0.21" CS X 1.475" ID Viton FKM O型環 | AS568-325 | Dash 325 | X-Ring | 70硬度 (10個/包)

0.21" CS X 1.475" ID Viton FKM O型環 | AS568-325 | Dash 325 | X-Ring | 70硬度 - Main image
$42.25 $59.51 In stock

Viton FKM O型環,內徑 1.475 英吋,截面 0.21 英吋。使用溫度範圍 -15°F 至 +400°F(-26°C 至 +204°C)。也稱為 FKM、氟橡膠。

規格參數

  • 產品類型: O型環(X型環)
  • 材質: Viton FKM
  • AS568 破折尺寸: 325
  • 截面: 0.21"(5.33 公釐)
  • 內徑: 1.475"(37.47 公釐)
  • 硬度: 70 Shore A
  • 溫度範圍: -15°F 至 +400°F(-26°C 至 +204°C)
  • 測量類型: 英制
  • 包裝數量: 每包 10 個
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (5.0 / 5 · 5 reviews)

Elizabeth Y. ★★★★★

The 1.475" inner diameter was spot-on for my hydraulic fitting, and the Viton material feels properly dense at 70 durometer. I've had these in service for a few weeks now with zero leaks, and the -15°F to +400°F range gives me peace of mind for both cold starts and hot runs.

Owen ★★★★★

These Viton o-rings handled the high heat on my industrial compressor without any issue. The 70 durometer feels a bit firmer than the old Buna-N seals I was using, but they’ve held up perfectly in the 200°F range.

Samuel Q. ★★★★★

Used one to replace a worn seal on a pneumatic fitting and it seated perfectly—the 70 durometer feels firm but not brittle. The 1.475" inner diameter matched the groove exactly. Already ordered a second pack for spares.