What a #5 Flat Washer Actually Measures
When you need a flat washer for a #5 screw, the size is not a guess. A #5 flat washer has a 0.125" inner diameter (ID) and a 0.312" outer diameter (OD), with a thickness of 0.025". These imperial dimensions match the #5 screw shank and provide a proper bearing surface without excessive overhang.
The ID must clear the screw threads but not be so loose that the washer shifts. The 0.125" ID is a standard fit for #5 fasteners. The 0.312" OD spreads the load over a wider area than the screw head alone, which helps protect softer materials like wood or thin metal from deformation.
Catalog Reference: #5 x 5/16" OD Flat Washer
- #5 x 5/16" OD Flat Washers | .025" Thick | 316 Stainless Steel (100 / Pkg.): Dimensions: .125" ID x .312" OD x .025" Thick These exact dimensions confirm the washer fits a #5 screw and provides a 0.312" outer diameter bearing surface.

#5 x 5/16" OD Flat Washers | .025" Thick | 316 Stainless Steel (100 / Pkg.) - #5 x 5/16" OD Flat Washers | .025" Thick | 316 Stainless Steel (100 / Pkg.): Material: 316 Stainless Steel 316 stainless steel offers better corrosion resistance than 304 or zinc-plated steel, especially in marine or chemical-exposed environments.
- #5 x 5/16" OD Flat Washers | .025" Thick | 316 Stainless Steel (100 / Pkg.): Pack quantity: 100 per package A 100-pack gives you enough washers for multiple projects without over-buying specialty sizes.
Why 316 Stainless Steel Matters for a Flat Washer
316 stainless steel includes molybdenum, which improves resistance to chlorides and acids. This makes it a strong choice for outdoor, marine, or food-processing applications where corrosion could compromise the fastener joint. The washer's plain finish means no coating to chip or wear off over time.
The supplied catalog confirms these washers are manufactured from 316 Stainless Steel and are well suited to distributing load and protecting surfaces under fasteners. If your environment involves saltwater, bleach, or frequent washdowns, 316 is a more reliable material than standard 18-8 stainless or zinc-plated alternatives.
Thickness and Load Distribution
At 0.025" thick, this #5 washer is relatively thin. It is designed for light to moderate load distribution under a fastener head, not for heavy structural shimming or high-torque applications. The thin profile helps it sit flush without adding significant height to the assembly.
If your application involves high clamping loads or soft base materials, consider whether a thicker washer (e.g., 0.050" or 0.062") might be needed. The catalog does not specify a load rating, so test the assembly under expected conditions to confirm the washer thickness is adequate.
What the Catalog Does Not Confirm
The supplied record does not include a hardness rating, corrosion test data, or a recommended torque value. These are common gaps for small flat washers. For critical structural or safety applications, consult the manufacturer or perform your own fit and load test before relying on this washer.
Also note that the product is sold as non-cancelable, non-refundable, and non-returnable excess stock. Verify your size and material needs before ordering.
Choosing a #5 Flat Washer: Key Considerations
- Screw size match: The 0.125" ID is correct for a #5 screw. Confirm your screw's shank diameter is within this ID tolerance.
- Outer diameter vs. clearance: The 0.312" OD is compact. Ensure the surrounding area has enough clearance for the washer without interference.
- Material environment: 316 stainless is excellent for corrosive settings. For dry indoor use, a less expensive material may suffice.
- Thickness vs. load: The 0.025" thickness is best for light duty. For heavy loads, consider a thicker washer.


