Back to Blog
Buying Guides 2026-11-17 Mutual Screw & Supply 0 views

Silicone O-Rings AS568-903: FDA Food-Contact Buying Guide

Silicone O-Rings AS568-903: FDA Food-Contact Buying Guide

Choose AS568-903 silicone O-rings with confidence: what the dash size, 70 durometer, FDA status and temperature range actually tell you before you buy a 400-piece pack.

Start with the groove, not the color

AS568-903 silicone O-rings solve a specific sealing problem: a food-contact application that needs a soft, heat-resistant seal in a standard dash size. Before you add a 400-piece pack to your cart, confirm three things: the groove accepts a dash 903 ring, the 70 Shore A durometer suits your hardware, and silicone is compatible with everything the ring will touch. Color and FDA status come after those checks, not before.

What the AS568-903 catalog record confirms

Dash 903 dimensions: what the catalog does and does not give you

The catalog record identifies this as an AS568-903 O-ring in imperial measurement, but it does not list the actual inside diameter, outside diameter, or cross-section. That is a real limitation for a buying decision: you cannot verify groove fit from the record alone. Use the AS568 standard dash 903 size from your own engineering reference or the groove drawing, then confirm the supplier's dimensions before ordering. Do not assume a dimension from the dash number without checking.

FDA 21 CFR 177.2600: what it covers and what it does not

The record cites FDA 21 CFR 177.2600, the regulation for rubber articles intended for repeated use in food contact. That citation tells you the material is claimed to meet the regulation's requirements for food-contact rubber. It does not tell you the ring is suitable for every food type, every temperature, or every cleaning regimen. If your application involves fatty foods, acidic products, or high-temperature washdown, check the full compliance documentation and your own regulatory requirements before relying on the claim.

70 durometer red silicone: hardness and color in context

70 Shore A is a common mid-range hardness for O-rings. It offers a balance between conformability and resistance to extrusion, but the right hardness depends on your groove design, pressure, and mating surfaces. The red color is a compound identifier, not a performance rating; do not read it as a temperature or FDA indicator. If your specification calls for a different durometer or color, this ring is not a substitute without engineering approval.

Temperature range: compare it to your whole process

The listed service range is -80°F to +450°F (-62°C to +232°C). Compare that against every temperature the ring will see, including cleaning and sanitizing steps, not just the product temperature. Silicone is known for wide temperature tolerance, but the catalog does not provide compression set, swell, or chemical resistance data for this specific compound. If your process pushes toward either end of the range or involves aggressive chemicals, request the full data sheet.

A pre-purchase checklist for food-contact sealing

  • Confirm the groove and dash size: Verify that your hardware is designed for an AS568-903 ring and obtain the actual dimensions from the supplier or your standard.
  • Match the durometer to the groove: 70 Shore A is a starting point; check your groove design and pressure to confirm it is appropriate.
  • Check chemical compatibility: Silicone has known limitations with some oils and solvents; confirm compatibility with your specific media.
  • Verify the FDA claim against your requirement: The record cites 21 CFR 177.2600; ensure that regulation is the one your application requires and request supporting documentation.
  • Plan for the pack size: 400 pieces is a maintenance or production quantity; confirm storage conditions and shelf life with the supplier if you will not use them quickly.

When the AS568-903 silicone O-ring is the right call

Choose this ring when you need a standard dash 903 seal in a food-contact application, your temperatures fall within the listed range, and your media are compatible with silicone. It is a practical stock item for food-processing equipment maintenance where a 400-piece pack makes sense. If your application involves petroleum-based oils, high-pressure extrusion, or a groove that requires a different durometer, look at other compounds or consult the supplier before ordering.

Related Articles

Customer Service
Home
Products
Cart
Profile